After having an offroading ride on motocross or on a dirt bike, you need to clean your bike helmet. Here is how to clean a dirt bike helmet easily in very less time with 5 steps.
Safety always is a top priority for all riders. when it comes to motorcycle riding, the helmet is the most important gear! and it often gets dirty after rides! Especially when you’re riding a dirt bike on a track or practice arena, it gets dirty very easily. The dirt bike helmet accumulated mud, dirt, dust, little particles, and so many things while riding.
Also, the inner pad of a dirt bike helmet gets very dirty because of our hair sweats while riding, and the pads of the dirt bike helmet can be affected by bacteria. So, it’s very much essential to clean a dirt bike helmet. Here I will guide you on how to clean a dirt bike helmet quickly, how to clean the dirt bike helmet pads, things you need, what to avoid, safety tips and so many things. Let’s Begin with the importance of cleaning a dirt bike helmet.
Importance of Cleaning a Dirt Bike Helmet
You should clean your dirt bike helmet regularly, and there are so many reasons. here are a few points on why you should clean a dirt bike helmet regularly.
Hygiene And Odor Control
No matter what branding helmet are you using, it is very normal to get a dor smell after a few rides. I’m talking about normal motorcycle rides on a clean road without any mud! when it comes to dirt bike rides, they get dirty very easily! because dirt bikes are normally used on off-road, muddy roads, and tracks. So, the dirt bikes themselves and the dirt bike helmet accumulate dirt, and mud and get very dirty after a ride.
The inner part of the dirt bike helmet also gets affected because of this, the pads smell very bad! if you don’t wash after riding on offroad, tracks. Sweat and dirt accumulate inside the helmet during rides, creating a breeding ground for bacteria and unpleasant odors. If you clean your dirt bike helmet after each ride, the inside odor from the dirt bike helmet pad can be reduced to some extent, hence it’s very much essential to clean the dirt bike helmet to maintain hygiene and control the bad smell.
Clear Visibility
Celaing a dirt bike helmet regularly not only removes odors, but it also helps for clear visibility. After riding in mud, offroad the dirt bike helmet accumulates dirt. mud and grime, and blocks the visibility of the dirt bike rider. So, if you’re planning for the next dirt bike riding season then I recommend you clean the dirt bike helmet.
Ventilation
I already discuss how improper ventilation leads to fogging up a helmet, and how to stop it. Ventilation plays a very crucial role for a rider. All motorcycle and dirt bike helmets are equipped with a ventilation system. If you look closely at your helmet, you will be able to see vents on the top, side of the helmet. The inside air of the dirt bike helmet and other helmets get warmer while riding because of our hair and sweating. To provide comfort and relaxation vents are provided to have sufficient airflow inside. A cleaned and well-maintained dirt bike helmet provides sufficient airflow to the dirt bike rider’s head, while a dirty helmet blocks the air vents hence the rider gets less air inflow. So, always clean the dirt bike helmet if you’re a dirt bike rider.
Stains and Marks
Regular cleaning of a dirt bike helmet removes the stain and marks off your helmet very easily. As explained above the dirt bike helmet accumulates dirt, mud, insect derbies, and other things while riding. cleaning the dirt bike helmet restores its fresh look and makes it look very fresh and well-maintained.
Reducing Allergens
If you have allergies or sensitivities, a clean helmet is very much essential for you. dust, mud, and other allergen get intact to the helmet surface as well as inside the pads, These things can trigger allergic reactions or respiratory issues. So, always keep your bike helmet clean.
Professionalism
If you participate in competitive dirt bike events or races, a clean helmet reflects professionalism and attention to detail! it basically shows that you took this sport very seriously and respected the importance of safety and hygiene.
Prolonged Lifespan
Regular cleaning prevents the degradation of the helmet material caused by dirt and grime buildup. Hence you can extend the lifespan of the helmet.
Things You Need For Cleaning
in this article on how to clean a dirt bike helmet, I’m gonna explain both how to clean a dirt bike helmet quickly during rides of an event and how to clean a dirt bike helmet after rides. In order to clean a dirt bike helmet effectively you may require some tools and materials or products. I personally have that product for cleaning my motorcycle helmet. It’s a one-time investment and can be used for years with this. Here is some item I personally thinks you should use while cleaning a motorcycle helmet as well as a dirt bike helmet.
1. Microfiber Cloths
Microfiber Cleaning Cloth
2. Soft Brush
Ultra-Soft Car Cleaning Brush
3. Helmet Cleaning Spray
Helmet Care Kit
4. Screw Driver Sets
STREBITO Screwdriver Sets
How to Clean a Dirt Bike Helmet – Step-By-Step Guides
1. Disassembling the Helmet
The first thing you need to do is disassemble the dirt bike helmet. Some helmet comes with an easy disassembling mechanism while other requires some tools like a screwdriver. In this disabling process, you have to remove this visor very carefully.
Here in this post How To Clean Motorcycle Helmet Visor, I already explained how to do it very easily, Then if you have any extra parts attached to your dirt bike helmet such as action camera mounts, or upper shield parts of a dirt bike helmet, you need to remove them first. don’t touch the inner pads of the dirt bike helmets at the beginning,
2. Cleaning the Helmet Shell
Here You have to use a microfiber cloth to clean the surface without harming and without scratching the helmet surface of your dirt bike helmet. Here you have to wipe the dirt bike helmet surface very gently if the mud and dirt feel hard on the helmet surface.
then you can put some water on microfiber cloths then start wiping it. it will speed up the cleaning process and it will be easy for you to clean hard accumulated particles on the helmet. If requires, you can use the soft brush that i reminded above, make sure all the helmet surfaces covered
3. Cleaning the Helmet Interior
The helmet interior consists of safety pads, these pads basically absorb the impact and save your head during a crash.
How to clean a dirt bike helmet pads
this also depends on the condition of the helmet pads, if your helmet pads are very dirty you need to take them out and clean them. Otherwise, you can clean it with a tissue or helmet pad cleaning spray.
There are two ways you can clean dirt bike helmet pads effectively. the first one is by using a soft cleaning soap and the second one is by using a washing machine. For the first method, you have to take a small amount of soap put this in a small bucket, add some water and put the pads in it, wait for 10 to 15 minutes. now take out the pads and dry them!
the second method, you can put your dirt bike helmet pads into the washing machine, making sure the speed is low to medium. I highly remind you to do it by using your hands, it’s very easy and takes very less time to clean dirt bike helmet pads.
4. Cleaning the Helmet Visor
if you want to clean your helmet visor effectively in under a minute, follow this article How To Clean Motorcycle Helmet Visor. You have to be very careful while cleaning a helmet visor, here requires a microfiber cloth to clean a helmet visor. if your dirt bike helmet is detachable then do it and wipe it with a microfiber cloth, if it accumulated a lot of dust then wipe it with tap water first. then wipe it with a microfiber cloth gently. after cleaning the helmet visor, leave it for some time for drying.
If your dirt bike helmet is not equipped with a visor, then you must use goggles for a motocross dirt bike. You can follow the same process of the visor cleaning process to clean your motocross dirt bike helmet goggles.
5. Drying and Reassembling the Helmet
The last step of cleaning a dirt bike helmet is drying and reassembling the helmet. You can start reassembling the outer parts of the helmet first, such as mounts, and upper sun shield parts. Then insert the padding inside the helmet very carefully, as this is the main part and absorbs impacts. Make sure the pads are fitted perfectly. Now, you have to install the visor, if your motocross dirt bike helmet comes with a visor otherwise store the helmet in a helmet bag to keep it safe from dust.
Tips
- Don’t use any soap to clean the pads, use a soft baby soap or cleaning soap.
- While cleaning your dirt bike helmet, find a quieter and disturbance-free place.
- don’t put it on a high table or similar places, it can fall down and crack the shell.
- always test it out after cleaning the dirt bike helmet. check the pads, straps, and the visor. make sure all the helmet mechanisms are working perfectly.
FAQs
How often should I clean my dirt bike helmet?
I recommend you clean your dirt bike helmet after every few rides, if it gets too dirty after one ride, clean it asap.
Can I wash the helmet lining and pads?
yes, you can! now most of the helmet comes with removable and washable pads, so yes, you can clean the helmet lining and inner pads as well.
What should I use to clean the helmet visor?
you can use microfiber cloths with mild soap or designated helmet-cleaning solutions. You can read it here, How To Clean Motorcycle Helmet Visor.
Can I submerge the helmet in water for cleaning?
I don’t recommend it. instead, disassemble all the parts and clean each part. water can cause excessive moisture and it can affect the helmet’s internal components. You can use a damp cloth to clean helmet surface.
How should I dry my helmet after cleaning?
allow it to dry naturally, and don’t use any extra heat or direct sunlight.
Can I use household cleaning products to clean my helmet?
it is best to avoid using harsh housing cleaning products, it can damage the helmet materials.
How should I clean the helmet’s ventilation ports?
you can use a brush to clean the ventilation parts on a dirt bike helmet. you can also use the blower to take out dust and other particles.
What should I do if my helmet has an unpleasant odor?
if your helmet has a persistent odor, you can try using a helmet deodorizer spray or placing odor-absorbing products, like baking soda or charcoal,
Can I machine wash my helmet’s removable liner?
Yes and No! depends on the manufacturer’s instructions. Some helmet liners are machine washable, while others require hand washing.
Should I clean the helmet strap and buckle?
Yes, it is important to clean the helmet strap and buckle regularly.
