Here in this article, I will be discussing how to stop helmet visor from fogging up. This is a very common and annoying problem for almost every rider! who doesn’t know how to prevent a motorcycle helmet visor from fogging up.
In this article, you will get to know how to stop motorcycle helmet visors from fogging up, also why helmet visor fog up, the importance of clear vision while riding, and maintenance guides.
Why is Your motorcycle helmet fogging up?
There are many reasons your helmet visor fogs up! here is the most common reason why your helmet visor fogs up. after that, I will guide you on how to stop the helmet visor from fogging up
Moisture Condensation
One of the most common your motorcycle helmet visor fogging up is moisture condensation. Helmet visor fogging occurs due to moisture condensation inside the helmet. When warm and moist air comes into contact with the cooler surface of the helmet, it condenses and forms very tiny droplets! and obstruct the clear vision
Temperature and Humidity Factors
The outside temperature and humidity play a moisture condensation and fog inside the motorcycle helmet. When the outside temperature is low and the temperature inside the helmet is high comparatively, condensation and Foggs occur. Also, the high humidity contributes the moisture buildup.
Poor Ventilation
This is the most common problem! My motorcycle helmet fogging up because I use an action camera strap on my motorcycle helmet! and it blocks the front ventilation hence the inside air gets stuck and builds up moisture due to high temperature than the outside temperature. During rides, we or the rider release warm, moist air from the mouth and nose, and the moisture buildup happens when the air gets trapped inside. So make sure you are not blocking any ventilation of your motorcycle helmet! if you want to stop the helmet visor from fogging it up.
Ambient Moisture and Rain
External moisture, such as rain or high humidity in the environment, can worsen helmet fogging.
Riding in Wet Conditions
Rainfall and Splashing from other vehicles can also lead to moisture inside the motorcycle helmet! hence fog builds up. This is why I hate the rainy season :), my motorcycle helmet doesn’t have any prevention system so, it really irritates me while riding! I have to open the helmet visor frequently to clear the fog inside the helmet! this is obviously very risky, while opening up your visor so many bad things can happen! so, I decided to take care of this problem and I found the best way to stop the motorcycle helmet visor from fogging up.
Importance Of Clear Vision While Riding A Motorcycle
Before jumping to the main topic of how to stop motorcycle helmets from fogging up, let’s have a look at the importance of clear vision while riding.
Safety
Clear vision is always crucial for all riders not only limited to motorcycle riders. the clear vision allows the rider to see road conditions and other things! and enables them to react quickly based on the situation!
Awareness
The more you see the more your brain can sense of the surroundings. so it directly helps you and enhances the situation awareness.
Judging Distance:
With clear vision, you can accurately judge the distance during rides and because of this, you will be able to react quickly when to accelerate and when to brake! you will have no problem during cornering with a clear-vision helmet visor.
Reading Road Signs
You will be able to see the road and the road sign more clearly! so, you will be able to follow traffic rules, navigate the intersections and stay in the correct lane 🙂
Identifying Obstacles
we know this is a common problem while riding a motorcycle! In many cases, we found tinny objects, stones, and other objects! if you don’t have a clear visor, these obstacles and hazards can lead to serious accidents and injuries! so, don’t delay! make your helmet visor fogs free.
Nighttime Riding
I personally faced this problem! this is very annoying! personally, I drive my motorcycle more carefully at night time, because you have to rely on your motorcycle headlight most of the time and if your helmet visor gets fogged up, then you will not be able to see the road and other cars clearly! you will see a blurry version of a car passing by and the road! so, it’s very dangerous to ride at night time with an unclear motorcycle helmet visor. if you ride at night more frequently than others, I recommend you get your helmet visor fogs free asap.
Confidence and Comfort
The more clear you see the more comfortable you can ride your motorcycle, hence you will enjoy the ride and you will have confidence. You don’t have to lift the visor often to clear the fog and moisture build-up.
How To Stop Motorcycle Helmet Visor From Fogging Up?
here are the ultimate guides on how to stop motorcycle helmet visors from fogging up. here Im splitting this into three sections, the pre-ride preparations, quick fixes while riding, and long-term maintenance tips.
Pre-ride preparations
Planning for a ride? do you have plenty of time? then these options are for you. these methods are the most effective methods to stop your motorcycle helmet visor from fogging up.
1. Anti-fog coating
applying an anti-fog coating to the inside of your visor can help to reduce fog formation significantly. The antifog coating basically works by creating a hydrophilic surface or layer on the visor that depresses the moisture build-ups. There are many manufacturers that offer motorcycle helmet visors with built-in anti-fog coatings.
Anti Fog Spray
Resistant & Invisible
Safe On All Glass, Mirror Surfaces& visor
Quick & Easy Use
How to use Anti Fog Spray on Motorcycle Helmet to Stop fog build-up
- Clean the visor properly, if you’re not sure how to clean a motorcycle helmet visor, check this post How To Clean Motorcycle Helmet Visor where you will get to know about everything.
- After cleaning the visor, now ou you have to shake the anti-fog spray bottle to mix its contents properly.
- Hold the motorcycle helmet visor 6 to 8 inches away from your face, and spray a thin, even layer of the anti-fog solution inside the visor area. and don’t over-spray the anti-fog spray on the visor.
- After applying the anti-fog spray use clean cloths(microfiber cloths) to spared the solution evenly across the motorcycle helmet visors, and make sure to cover all the area.
- Now let it dry for at least 4-5 minutes.
- Voila!! Done! now if you open up your visor for cleaning, make sure to test out its fitting and mechanism before going for any rides.
2. Breath deflector
I personally use this! it works great! if you ride a motorcycle you already knew about these things, the balaclava works great to minimize the moisture inside the helmet. The Balaclava not only minimizes the fog build-up but can also minimizes wind noise, gives wind protection, and protection from dust and it saves your hair! Let me share a short story! In the beginning, after purchasing my bike, I didn’t use a balaclava or any kind of mask, after then my ear kept ringing! it’s because of excessive wind noise and it’s damaged my ear. So, always use a balaclava while riding a motorcycle. The usage is very simple, you have to put this on your head.
3. Anti-Fog Insert
One of the easiest and permanent solutions to stop a motorcycle helmet visor from fog build up. it’s a transparent film that is applied to the inner side of a motorcycle helmet. the insert is made of a material that can absorb moisture and keeps the helmet visor fogs free. I recommend you use an anti-fog insert or the pin lock visor system. Anti-fog insert works very well on all types of motorcycle visors. and it’s very easy to use.
Universal Helmet Shield Anti-Fog Film
better optical clarity
circled back adhesive, easy to operate and paste
Suitable for most motorcycle standard visor/shield,anti-fog lens insert.
it’s very easy to use an antifog fil on a motorcycle helmet.
- Open your visor, you can refer to this post for how to open a motorcycle helmet visor
- remove your visor and turns upwards and flex the anti-fog insert,
- align properly with the helmet visor
- push the anti-fog insert slightly from the middle to both sides with your two hands
- use one hand to hold the visor and another hands finger with the soft fabric to press the glue
- now you can remove the blue tag or upper layer of the protective film
- Reinstall the helmet visor after some time
- Done! you have successfully inserted the anti-fog insert on your visor.
4. Pinlock Visor System
Installing a Pinlock visor system is the best way to stop motorcycle helmets from fogging up. This is the best permanent way to stop fogging build-up inside a motorcycle helmet. Nowadays most motorcycle helmet manufacturers offer pin-lock-ready visors with their helmets. So, you just need a Pinlock visor system then it’s very easy to install on your motorcycle helmet visor.
The installation of the Pinlock visor system is very easy, without opening your helmet visor fully you can insert it. you have to align your Pinlock with the helmet pin position, it’s visible on the visor’s left and right sides.
Quick fixes while riding
If you’re in the middle of the riding and faced sudden visor fogging while riding, there are a few quick methods you can follow to keep the fog away from the motorcycle helmet.
5. Open The visor
If your motorcycle helmet is fogging up, at that time you can slightly open the visor to create a small gap. This allows the fresh airflow inside the helmet and helps to omit the moisture build-up. While doing this please make sure you’re not overspending and you’re on a safe lane, and if the fog disappears you can close the visor again and reopen it when required.
6. Adjust the ventilation
Another option is to stop your motorcycle helmet visor from fogging up. Most motorcycle helmet comes with an adjustable ventilation system, if you notice a visor fogging up then you can adjust the ventilation system of your helmet. Normally vents are located at the front, top, and sides of your helmet. properly adjusting the airflow can create an airflow pattern that effectively reduces fogging.
7. Use an anti-fog spray or wipe
Already mentioned above, you can keep this with you and a microfiber cloth. after wiping the surface of the helmet visor you can apply the spray and wash it with a microfiber cloth. it’s a very easy but effective way to stop motorcycle helmet visors from fogging up.
FAQ
Can I use household products like soap or shaving cream to prevent visor fogging?
No, it’s not recommended. Household products are not designed for visor use and may leave residues or impair visibility.
Do Pinlock inserts fit all helmet brands?
Pinlock inserts are available for a wide range of helmet models and brands, but not all helmets are compatible. Check if your helmet is Pinlock-ready before purchasing an insert.
How often should I clean the anti-fog insert?
Clean the insert whenever you notice reduced anti-fog effectiveness or visible dirt/moisture saturation. Frequency depends on usage and personal preference.
Can I use an anti-fog spray on the outside of the visor?
Anti-fog sprays are typically designed for the inside of the visor. Applying them outside may not be as effective due to airflow and environmental factors.
Do helmet visor inserts affect peripheral vision?
No, properly installed visor inserts, such as Pinlock inserts, are designed to fit within the visor’s boundaries and should not significantly impact peripheral vision.
Can I use a waterproof rain cover over my helmet to prevent fogging?
Using a rain cover over the helmet may reduce the amount of airflow and actually contribute to increased fogging. It’s best to rely on anti-fog measures specific to the visor.
Do different helmet visor colors affect fogging?
While different visor colors may have slight variations in their anti-fog properties, the primary factor in preventing fogging is the use of anti-fog treatments or inserts.
Can I use a defogging spray meant for scuba masks on my helmet visor?
Defogging sprays for scuba masks may not be suitable for helmet visors. It’s best to use products specifically for motorcycle helmet visor fog prevention.
Should I remove the anti-fog insert when cleaning the visor?
It’s generally not necessary to remove the anti-fog insert when cleaning the visor. Clean both the visor and insert them separately according to the manufacturer’s instructions.
Can I use a small fan inside the helmet to prevent fogging?
Using a fan inside the helmet may not be practical and may interfere with the helmet’s safety features.
Also, read,
